Toll-Free: 800.957.4390
Phone: 330.427.0125
Fax: 330.427.0800
Email: info@tsengineering.com

ST-1900 Specifications

SmartTrigger Overview

Vibratory Feeder Controls
Single, Dual, and Triple Units (15 Amp Capacity)

The ST-1900 Series of Controls are used to operate vibratory bowls with part sensing, and storage hoppers fitted with electronic bowl level detectors. The 10 to 24 Vdc adjustable power supply and sensor time delays are provided by the control. The demand cycling of the bowl or hopper is controlled by the sensor’s output signal processed through the time delay settings of the unit if selected. The units are operational in both Open Loop and Closed Loop (sensor option) mode.

• Soft-Start
  
• Line regulation, Surge Protection
  
• NPN or PNP Track level sensor Interface
  
• Run Interlock Input (Remote Hold)
  
• Power Output Range Select (Open Loop Mode)
  
• On and Off Delays
  
• Frequency Selectable Outputs
  
• Phase Select
  
• Operate / Hold Out (Interlocking)
  
• Auxiliary Control Inputs
  
• 120 Vac and 220 Vac Models are available

Catalog Specification