Toll-Free: 800.957.4390
Phone: 330.427.0125
Fax: 330.427.0800
Email: info@tsengineering.com

ST-1400 Specifications

SmartTrigger Overview

Vibratory Feeder Controls
Single, Dual, and Triple Units (15 Amp Capacity)

The ST-1400 Series of Controls are used to operate vibratory bowls with part sensing, and storage hoppers fitted with electronic bowl level detectors. The demand cycling of the bowl or hopper is controlled by an external input signal processed through the Remote Hold and time delay settings of the unit if selected. The units are operational in both Open Loop and Closed Loop (sensor option) mode. An optional input connection for a 10 to 24 Vdc power supply is available so that a NPN or PNP track level sensor can be operated.

• Soft-Start
  
• Line regulation, Surge Protection
  
• (Optional) Track level sensor Interface
  
• Run Interlock Input (Remote Hold)
  
• Power Output Range Select (Open Loop Mode)
  
• On and Off Delays
  
• Frequency Selectable Outputs
  
• Phase Select
  
• Operate / Hold Out (Interlocking)
  
• 0 to +5Vdc Auxiliary Control Input
  
• 120 Vac and 220 Vac Models are available

Catalog Specification